Layout & bunk beds
A wider open cabin with two bunk units along the rear, a bathroom and kitchenette at the left, and a shared living area towards the porch. The separate side emergency door opens from the living/sleeping zone.

DESIGN 3 · CABIN IDEAS & DESIGNS
28 m² cabin concept · 7 × 4 m · bathroom and shower · bunk beds · two exits. A complete concept presentation following Design 5, with this cabin's own materials and character.

AI-generated views illustrate the style and may show differences in openings or proportions. Use the separate floor plan and written dimensions below to develop a coordinated design; image proportions are not measurements.
| Part of the cabin | Approximate dimensions / planning notes |
|---|---|
| Cabin planning footprint | 7 × 4 m = 28 m²; clear usable space depends on wall thickness. |
| Bathroom | 2 × 2 m = 4 m² planning zone at rear left. |
| Kitchen zone | 2 × 2 m = 4 m² at front left; fit counter and access during detailed design. |
| Sleeping and shared access | 20 m² remaining planning zone before partitions and fittings; two bunk units and clear routes to both exits. |
| Bunk frames | Illustrative 1 × 2.1 m frames, with separate allowances needed for ladders, guardrails and headroom. |
| Covered porch · additional | 7 × 1.5 m = 10.5 m²; proposed porch depth for this presentation. |
| Cabin plus porch | Approx. 38.5 m² of combined planning area; excludes roof overhangs and outside utilities. |
Dimensions are preliminary concept allowances. Door widths, windows, roof height, service capacities and structural sizes need a detailed local design. These smaller cabins prioritize sleeping, washing and food preparation; the porch supplies much of the relaxing and dining space.
A wider open cabin with two bunk units along the rear, a bathroom and kitchenette at the left, and a shared living area towards the porch. The separate side emergency door opens from the living/sleeping zone.
A private shower, toilet and basin are included in the basic layout, with ventilation, waterproof finishes, suitable drainage and a slip-resistant floor. Group plumbing with the kitchenette where practical.
The front entry opens from the porch. A separate side/back door provides another way outside; keep both routes and their outdoor landings clear. Final door positions, widths and hardware need local review.
Suitable locally sourced stone for wall finishes and the base, paired with bamboo or timber porch and roof details. The actual load-bearing structure and stone attachment need local design; stone facing can also be used on hollow-block walls.
Bamboo or timber roof framing/finish character as shown in the reference; nipa or cogon can be explored as a separate roofing option. Structure, roof treatment, wind resistance and weather detailing must suit the site.
The base concept stays at 7 × 4 m (28 m²). The same material palette and exterior character can inspire a larger house with more living space, separate bedrooms or another bathroom. A larger version needs a new coordinated floor plan, foundations, roof structure and utility sizing.
Concept inspiration only, not construction or permit plans. A qualified local designer should coordinate structure, dimensions, headroom, furniture access, emergency exits, electrical, plumbing, sanitation and applicable requirements before building. Material costs and local supplies have not been verified.